SEPROB based biological waste water treatment system is our inhouse developed technology and have been trail tested and proved for more than 6 years in the field of various sizes from 10 KLD to 1200 KLD. This technology uses the proven multi baffle isolated reaction technology combined with modern MBBR technology to improve the bioculture in the reaction tanks and to increase the sludge digestion. The system can be installed in Aerobic / Anaerobic type based on the land availability and final usage of treated water.

The advantages of installation of SEPROB system are:

SEPROB technology saves about 80% of construction cost for STP systems

Removal of minimum 60% of BOD loads in each stage Uses state-of-the-art sludge free technology.

Uses very less footprint area, and saves up to 50% of electric consumption.

Uses cylindrical shaped PE carrier in reactors to support bio film growth

Biomass grows primarily on protected surface on the inside of the carriers.

Air agitation or mixers are used to continuously circulate carriers

Perforated core inside the reactor keeps bio film carrier inside the tank

SEPROB technology saves about 80% of construction cost for STP systems

Treated water is of two times better quality than of any modern STPs

Power consumption is less than 50% of any conventional STP technology.

STP Blowers can run only for 16 hours (2 x 8 hours) per day.

Uses latest Bio-Enzyme technology for sludge less treatment.

It is a progressive system and the bio film thickness is maintained bythe aeration-mixingprocess.

No problems with odour, pests (snails or red-worms) as in air phase fixed films.

Can be commissioned within 45 days from the date of ordering

Non clogging design, Smaller Foot prints, operates at varying influent load& can easily be retrofitted.